GGoodDock

GoodDock Blog

Photo Scanning Resolution Guide: A Printable DPI Chart

A photo scanning resolution guide answers the question every family archivist asks at the scanner: what number do I pick? Too low, and the scan falls apart the moment you print it big. Too high, and you wait forever for files so large nobody can open them.

Here is the short version. Most old prints scan best at 600 dots per inch. Slides and negatives need more, because the original is tiny. Pick the right number once, save a master file, and never scan the same photo twice.

Scan old prints at 600 DPI, slides and negatives at 2400 DPI or higher, and save one master TIFF plus a smaller JPEG for sharing. One good scan serves prints, screens, and backup. Scanning low to save time only buys a second scan later.

What DPI actually means

DPI means dots per inch: how many pixels the scanner captures for each inch of the original. A 4 by 6 inch print scanned at 300 DPI becomes 1200 by 1800 pixels. The same print at 600 DPI becomes 2400 by 3600 pixels. More dots, more detail, bigger file.

Here is the part people miss. DPI only matters next to print size. A 2400-pixel-wide scan prints beautifully at 8 inches wide, since 2400 divided by 300 equals 8. It prints poorly at 24 inches wide. Resolution is not quality magic. It is simple division.

  • 300 DPI: fine for sharing online and small reprints of good originals.
  • 600 DPI: the sweet spot for most old prints you may ever reprint.
  • 1200 DPI: worth it for small, sharp originals or photos you plan to crop hard.
  • 2400 DPI and up: the range for slides, negatives, and tiny snapshots.

The DPI chart: prints, slides, and negatives

Use this chart as your default. It assumes you want one master scan that can print at the same size as the original or a bit larger. If storage space is tight, drop one step, but never below 300 DPI for prints you care about.

Scan the best original you own. A copy of a copy will not gain detail at any resolution. And clean the glass first. Dust scanned at high resolution becomes a permanent part of the picture.

OriginalScan atGood for
Standard print, 4x6 or 5x7600 DPIReprints up to 8x10, sharing, backup
Large print, 8x10 or bigger300 to 600 DPISame-size reprints and enlargements
Small snapshot, wallet size1200 DPIEnlarging a tiny original without mush
35mm slide or negative2400 DPI or higherPrints, screens, and archive masters
Document or newspaper clipping300 DPI, grayscaleReadable text without huge files

File formats: save a master and a share copy

Save two versions of every important scan. A master file in TIFF format holds full detail and never degrades when you open and save it. A JPEG copy, smaller and lighter, is the one you email, post, and put in slideshows.

Name files so future-you can find them. Year, event, and a short description beat the scanner's default name every time. Try 1968-mom-beach-001. Skip spaces and odd symbols. One naming habit across the whole archive saves hours later.

  • Master: TIFF, full resolution, stored in your backup set.
  • Share copy: JPEG at 80 to 90 percent quality, easy to send.
  • Skip PNG for photos: it works, but files run large for no visible gain.
  • Never edit the master: crop and fix only copies, and keep the original scan safe.

The scanning order that saves time

Scanning everything in random order is how boxes stall. Sort first, scan second. Pull the fragile and fading photos first, then the family favorites, then the rest by year. A sorted pile scans twice as fast as a mixed one, because you stop deciding and start feeding the scanner.

Work in batches of 20. Scan, name, and file each batch before starting the next. Check the first scan of each batch at full size on screen. A smudge caught at scan 1 saves 19 rescans. That is the whole trick. Slow start, fast finish.

Scanner settings that matter besides DPI

DPI gets all the attention, but two quieter settings shape the result. First, color mode: scan color photos in full color, even faded ones, because color holds detail that grayscale throws away. Scan black-and-white prints in grayscale, not color, to keep files smaller and cleaner.

Second, turn off auto-enhance for your master scans. Auto-fix tools sharpen and brighten in ways you cannot undo later. Scan flat and honest, save the master, then enhance a copy if you like the look. A boring master is a useful master.

  • Color photos: full color, always, even when the colors look washed out.
  • Black-and-white prints: grayscale, which keeps files lean and tones true.
  • Documents: grayscale at 300 DPI, unless color notes matter.
  • Auto-enhance: off for masters, on only for share copies you edit.

After scanning: back up before you celebrate

A scan that lives only on one laptop is not saved. It is borrowed time. Copy your masters to two places that are not the same device: an external drive and a cloud folder, or two drives in different rooms. Check that the copies open. A backup you never tested is a rumor.

Then put the originals back carefully, labeled, in a cool dry spot. Scans replace handling, not the photos themselves. Future scanners will do a better job than today's, and your grandkids deserve the originals too.

I turned this into a free printable photo scanning resolution chart — get the free sample. It comes from the 58-page EverKeep handbook with a 4-sheet Excel workbook, built on a 5-phase rescue system and the 3-2-1 backup rule.

What DPI should I scan old family photos at?

Scan most old prints at 600 DPI, which gives a 4 by 6 print enough pixels for an 8 by 10 reprint and clean screen viewing. Drop to 300 DPI only for large prints or when storage is very tight. Scan slides and negatives at 2400 DPI or higher, since the original is far smaller than a print.

Is 300 DPI enough for scanning photos?

For sharing online and same-size reprints, yes, 300 DPI is enough. It falls short when you enlarge a small original or crop into a detail, where pixels run out fast. If you may ever print larger or crop hard, scan at 600 DPI now. Rescanning later costs more time than the bigger file costs today.

Should I save scans as TIFF or JPEG?

Save both. Keep a TIFF master for archiving, because it preserves full detail and never degrades when reopened and saved. Make a JPEG copy for sharing, email, and slideshows, since it is far smaller. Edit only the copies, and keep the master untouched as your safety net.

How do I scan a lot of photos without quitting halfway?

Sort before you scan, starting with fragile and favorite photos, then work by year in batches of 20. Scan, name, and file each batch before starting the next, and check the first scan of each batch at full size. A steady batch habit beats weekend marathons, which is how most photo projects stall.